 |
Airflow Developments Telescopic Pitot Tube Max Length 0.98m x 4mm dia
The Pitot static tube is a universally accepted means of establishing air velocity in ducts not fitted with permanent flow monitoring devices. When used with a high quality manometer the accuracy and dependability of results is far greater than with any non-fundamental method.
Availablity: Hire, Sale, Calibration
|
|
|
Airflow Developments 2.3mm, 4.0mm, 8.0mm and 9.5 mm head diameters
Developed between 1952 and 1954 by the National Physical Laboratory and manufactured since 1955 by Airflow Developments Limited the modified ellipsoidal nose Pitot Static tube is recommended in BS ISO 3966:2008 (previously BS1042 Part 2. 1:1983) for measuring the flow of air in ducts by the traverse method.
Availablity: Hire, Sale, Calibration
|
 |
Airflow Developments Pitot tube with adjustable glands
These are standard sized pitot tubes manufactured with adjustable gland assemblies which can be used for the permanent fixture into ducts and pipelines.
Availablity: Sale, Calibration
|
 |
Airflow Special Products EasyFit pitot tubes
These low cost ellipsoidal nose pitot tubes are manufactured to meet the requirements contained in BS ISO 3966:2008, and use an "EasyFit" design for the pressure tappings.
Availablity: Sale, Calibration
|
 |
Kimo Type L pitot tube
These pitot tubes are manufactured from stainless steel to the AFNOR NFX 10-112 norm and can incorporate a thermacouple so that they measure pressure/velocity as well as temperature.
Availablity: Sale, Calibration
|
 |
Kimo Type S pitot tube
Manufactured to the requirements contained in ISO 10780 these S type pitot tubes are normally used in hot or particle-charged air streams at higher air velocities.
Availablity: Sale, Calibration
|
 |
Kimo Debimo airflow blades
The KIMO DEBIMO flow measuring blades are a simple and cost effective method of
providing permanent air flow measurement in rectangular or circular ducts.
Availablity: Sale, Calibration
|
